Prestige Flatbed Drop Decks Aluminum

DIMENSION
Length Customer Spec. (Min. 48', Max. 52'6")
Width Standard 102" Overall
Gooseneck Web Depth 10 3/4" Overall
Coupler Height 48"
King Pin Standard 24"; Other Options Available
Deck Height Standard 41”

SUSPENSIONS
Tandem Fixed, Tandem with Front or Rear Sliding Axle, Tri-Axle Fixed

RUNNING GEAR
ABS Brakes Meritor Wabco, Various Configurations Available, All Meet Transport Canada Regulations
Brake Drums Standard Cast, Outboard Mount; Other Options Available
Brake Lining HXS-H23 Extended Service
Hubs Standard Cast, Hub-Piloted, 10-Stud Unimount, Oil Lubricated; Other Options Available
King Pin Holland
Landing Gear Jost Magnum Aluminum Landing Gear c/w 10" Cushion Foot; 10 Year Warranty
Slacks Haldex S-ABA
Suspension & Axles Hendrickson INTRAAX; Other Options Available
Tires Wide Range of Michelin, BF Goodrich and Bridgestone Products Available
Wheel Seals National
Wheels Clean Buff Aluminum; Other Options Available

BODY STRUCTURE
Bolster - Front Aluminum Extrusion
Bolster - Rear Aluminum Extrusion
Bumper Bolt-On Aluminum, Transport Canada and DOT Certified Rear Impact Guard
Coupler Plate Standard 1⁄4" HS; See Optional King Pin Settings
Crossmembers Aluminum 4" @ 16" OC; See Available Options
Flanges Extruded Aluminum 6061-T6 Top & Bottom
Floor Aluminum 1 1/8" Riveted c/w 4 Hardwood Nailer Strips
Knee Braces Aluminum Tubing @ 48" OC; See Available Options
Lighting Truck-Lite LED Lighting; See Available Options; Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; See Available Options
Load Securement Various Fixed or Sliding Winches, Barrel or 3-Bar Style; J-Hooks, and Others - All Tested to Meet Current Load Securement Regulations
Mud Flaps Heavy Duty, Black Rubber, Anti-Spray, Anti-Sail
Rub Rail Aluminum Recessed 3/8" x 2 3/4" Continuous
Side Rail Aluminum 6" Extrusion c/w LL Winch Track; See Available Options
Stake Pockets 48" OC, c/w Pipe Spools; See Available Options
Web 3/8" Aluminum Plate @ Neck, 1/4" Remainder

STANDARD FEATURES
Air Gauge Box The aluminum air gauge box includes a dump valve as well as the air gauge
Aluminum and Steel Barrier Mylar tape and Eck barrier protection
Aluminum Crossmembers 4" aluminum crossmembers are huck-bolted to the top flange extrusion and bolted to the side rail. 12" spacing is standard, with a 16" spacing option available. Coil package option available.
Aluminum Flanges Extruded Aluminum 6061-T6 top & bottom
Aluminum Flooring Aluminum 1-1/8" riveted, coupled with 4 hardwood nailer strips
Aluminum Front Bolster The front bolster includes stake pockets and rub rail. Dock bumpers are mounted on the rear corners of the trailer.
Aluminum Knee Braces Tubular aluminum knee braces are set at 48" o.c. See available options.
Aluminum Main Rail The main rail is web fastened to the top and bottom flanges with aluminum huck bolts from the landing gear to the back of trailer
Aluminum Rear BolsterThe rear bolster has standard aluminum bolt-on bumper with integrated stake pockets. Dock bumpers are mounted on the rear corners of the trailer. A rear dunnage option is available on fixed suspension configurations.
Aluminum Rub Rail The aluminum rub rail has an outer surface recess to house and protect conspicuity tape
Aluminum Side Rail Aluminum 6" extrusion complete with LL winch track. Integral load hook track option available.
Cambered Main Beam Design Camber is built into every beam to offset beam deflection under load
Certified Cargo Securement Devices Each cargo securement device conforms to CMVSS 905
Hendrickson INTRAAX Suspension The Hendrickson INTRAAX suspension combines the axle and suspension as a fully integrated unit
In-Line Air Filter The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.
Landing Gear Jost Magnum aluminum landing gear coupled with 10" cushion foot. Comes with a 10-year warranty
Landing Gear Support Each landing gear leg is braced in multiple directions, providing exceptional stability
Plumbing & Wiring Air and electrical lines from the front of the trailer are routed above the crossmembers, under the flanges and secured in the floor cavity
Premium Coatings Three-stage paint process consisting of a zinc coating, urethane primer and top coat
Stake Pockets Two pipe spools are positioned between the 48” o.c. spaced stake pockets to help prevent damage from side-loading equipment. Each stake pocket and pipe spool is a tested and approved tie-down location, complying with Transport Canada requirements.
Upper Coupler The upper coupler design is one of the most robust in the industry
Web Stiffeners Fastened to main rails with aluminum huck bolts
Winches Sliding winches are located on a track wherever they will not interfere with toolboxes or tires

OPTIONS
Air Gauge Box Options Available options include a window in the door, air chuck, and a light
Aluminum Fill Plate Aluminum fill plate in bumper with Prestige Trailers logo
Axle Chain Slings Prevents air bags and shock absorbers becoming overextended
Bolt-On Bumper The bolt-on rear impact guard meets or exceeds all regulatory requirements of both US DOT and Transport Canada
Brake Drums Lightweight options available
Coil Package The addition of stub crossmembers between the main beams in specific locations
Crossmember Spacing Additional crossmembers spaced at 12" o.c. increase the overall strength of the floor area and increase the rigidity of the trailer in more demanding applications, such as forklift operation
Disc Brakes Hendrickson MAXX22T air disc brakes
Dunnage Rack The side-mount dunnage rack provides a secure location to transport dunnage lumber up to 9' in length. Also available in the rear bolster of some flat decks.
Hubodometer Available in either miles or kilometers
Knee Brace Spacing Optional closer knee brace spacing available
Lights - LED Lighting Packages 3 unique TRUCK-LITE LED lighting packages available, including rear strobe lighting and aluminum pull-out lighting
Lights - Strobe Lights Two yellow strobe lights are located in the rear bolster, operated by a switch in the air control box
Lights - Wide Load Lights Pull-out wide load LED lights can be extended to various widths and when stored are protected by a full- circumference shroud. On-off switch located in air gauge box.
Load Bunks Load bunks are matched to the upper deck to allow level-loading
Low Deck Trailer Lower deck trailer option available (35" deck height)
Sliding Front Axle An optional sliding front axle can be set at two different positions, allowing for greater flexibility in meeting weight regulations in different jurisdictions. A two-position rear sliding axle is also available.
Stake Pocket Spacing Extra stake pockets (24" o.c.) are available
Tarp Rope Hooks Tarp rope hooks can be installed around the perimeter of each trailer, beneath the deck to secure load coverings
Tire Inflation System Hendrickson TIREMAAX PRO
Tool Box Smooth aluminum toolboxes are available in a variety of sizes and finishes.

FEATURES LIST

Standard

Standard

Air Gauge Box

The aluminum air gauge box includes a dump valve as well as the air gauge
Standard

Aluminum and Steel Barrier

Mylar tape and Eck barrier protection
Standard

Aluminum Crossmembers

4" aluminum crossmembers are huck-bolted to the top flange extrusion and bolted to the side rail. 12" spacing is standard, with a 16" spacing option available. Coil package option available.
Standard

Aluminum Flanges

Extruded Aluminum 6061-T6 top & bottom
Standard

Aluminum Flooring

Aluminum 1-1/8" riveted, coupled with 4 hardwood nailer strips
Standard

Aluminum Front Bolster

The front bolster includes stake pockets and rub rail. Dock bumpers are mounted on the rear corners of the trailer.
Standard

Aluminum Knee Braces

Tubular aluminum knee braces are set at 48" o.c. See available options.
Standard

Aluminum Main Rail

The main rail is web fastened to the top and bottom flanges with aluminum huck bolts from the landing gear to the back of trailer
Standard

Aluminum Rear Bolster

The rear bolster has standard aluminum bolt-on bumper with integrated stake pockets. Dock bumpers are mounted on the rear corners of the trailer. A rear dunnage option is available on fixed suspension configurations.
Standard

Aluminum Rub Rail

The aluminum rub rail has an outer surface recess to house and protect conspicuity tape
Standard

Aluminum Side Rail

Aluminum 6" extrusion complete with LL winch track. Integral load hook track option available.
Standard

Cambered Main Beam Design

Camber is built into every beam to offset beam deflection under load
Standard

Certified Cargo Securement Devices

Each cargo securement device conforms to CMVSS 905
Standard

Hendrickson INTRAAX Suspension

The Hendrickson INTRAAX suspension combines the axle and suspension as a fully integrated unit
Standard

In Line Air Filter

The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.
Standard

Landing Gear

Jost Magnum aluminum landing gear coupled with 10" cushion foot. Comes with a 10-year warranty
Standard

Landing Gear Support

Each landing gear leg is braced in multiple directions, providing exceptional stability
Standard

Plumbing and Wiring

Air and electrical lines from the front of the trailer are routed above the crossmembers, under the flanges and secured in the floor cavity
Standard

Stake Pockets

Two pipe spools are positioned between the 48” o.c. spaced stake pockets to help prevent damage from side-loading equipment. Each stake pocket and pipe spool is a tested and approved tie-down location, complying with Transport Canada requirements.
Standard

Upper Coupler

The upper coupler design is one of the most robust in the industry
Standard

Web Stiffeners

Fastened to main rails with aluminum huck bolts
Standard

Winches

Sliding winches are located on a track wherever they will not interfere with toolboxes or tires

Optional

Optional

Air Gauge Box Options

Available options include a window in the door, air chuck, and a light
Optional

Aluminum Fill Plate

Aluminum fill plate in bumper with Prestige Trailers logo
Optional

Axle Chain Slings

Prevents air bags and shock absorbers becoming overextended
Optional

Bolt On Bumper

The bolt-on rear impact guard meets or exceeds all regulatory requirements of both US DOT and Transport Canada
Optional

Brake Drums

Lightweight options available
Optional

Coil Package

The addition of stub crossmembers between the main beams in specific locations
Optional

Crossmember Spacing

Additional crossmembers spaced at 12" o.c. increase the overall strength of the floor area and increase the rigidity of the trailer in more demanding applications, such as forklift operation
Optional

Disk Brakes

Hendrickson MAXX22T air disc brakes
Optional

Dunnage Rack

The side-mount dunnage rack provides a secure location to transport dunnage lumber up to 9' in length. Also available in the rear bolster of some flat decks
Optional

Hubodometer

Available in either miles or kilometers
Optional

Knee Brace Spacing

Optional closer knee brace spacing available
Optional

Lights - LED Lighting Packages

3 unique TRUCK-LITE LED lighting packages available, including rear strobe lighting and aluminum pull-out lighting
Optional

Lights - Strobe Lights

Two yellow strobe lights are located in the rear bolster, operated by a switch in the air control box
Optional

Lights - Wide Load Lights

Pull-out wide load LED lights can be extended to various widths and when stored are protected by a full- circumference shroud. On-off switch located in air gauge box.
Optional

Load Bunks

Load bunks are matched to the upper deck to allow level-loading
Optional

Sliding Front Axle

An optional sliding front axle can be set at two different positions, allowing for greater flexibility in meeting weight regulations in different jurisdictions. A two-position rear sliding axle is also available.
Optional

Stake Pocket Spacing

Extra stake pockets (24" o.c.) are available
Optional

Tarp Rope Hooks

Tarp rope hooks can be installed around the perimeter of each trailer, beneath the deck to secure load coverings
Optional

Tire Inflation System

Hendrickson TIREMAAX PRO
Optional

Tool Box

Smooth aluminum toolboxes are available in a variety of sizes and finishes.